How to use Floryn
Last updated 3 October 2026
Floryn turns a set of wedding details into a single link that opens as a finished invitation on a phone. There is no app and nothing to install. You provide your email when creating the invitation — we use it to send a magic sign-in link whenever you need to get back to your dashboard. No password, nothing to write down. This page is the whole process, in order.
The whole process at a glance
- 1MakeFill in the names and date, then get your link
- 2PersonalizeAdd each guest's name for their own link
- 3SendSend each guest their link
- 4Collect RSVPsGuests tap Yes, Maybe or Sorry
- 5ManageSign in with your email to edit or check replies
- 6DeleteRemove it yourself, or it is removed after 90 days
1. Make the invitation
Open the builder and fill in the form. Only the two names and the date are required. Everything else is optional, and an invitation with just names and a date is a perfectly good invitation.
- The two names. Shown on the card as written, and used to build the link.
- The date. Drives the countdown on the card. Past dates are refused, because a countdown into the past is not something anyone wants to send.
-
The time zone. The zone the date and times are entered
in, for example
Asia/ColomboorEurope/London. Guests see the couple's clock time, and their calendar converts it. -
The times. The ceremony start drives the countdown and
the calendar event. Reception time is optional and shows on the card.
Wedding ends is optional: it sets when the calendar event ends and when
RSVPs close. Without it, the calendar uses six hours and RSVPs close at
the end of the wedding day. Free text is rejected, because a mistyped
time blanks the date on the card. Use something like
4:30 PMor16:30. - The venue. Name, address, and a map link. For the map, open the venue in Google Maps, tap Share → Copy link, and paste that. Floryn keeps the place link and strips the click-tracking parameters off it, so a tap lands on the venue rather than on a map search.
- A message and a color theme. Both optional.
- Your email. Used only to sign you in later — never shown to guests. Enter it once here; after that, a magic link gets you back in any time.
- The human check. A quick bot check runs above the create button; the button stays disabled until it passes, so if it looks dimmed, give it a moment rather than clicking harder.
Copy or bookmark your invitation link before you close the tab. You can also find it any time on your dashboard — sign in from Manage your invitation with a magic link sent to your email.
2. Send it to your guests
How a guest gets their invitation
- 1You sendSend each guest their own link in WhatsApp, iMessage or email
- 2PreviewThe chat shows both names in your chosen theme
- 3Guest opensTheir link greets them by name on the card
- 4Guest repliesThey tap Yes, Maybe or Sorry on the card
The link is the invitation. Anyone who has it can read the card, and there is no password on it — that is deliberate, because a wedding invitation nobody has to knock for is the entire point.
It works in any modern browser and needs nothing installed, so it can go into a WhatsApp message, a group chat, an email or a text message. Where a guest opens it does not matter; the card is built for a phone first and widens from there.
One thing to know before you send: the link is not secret in any technical sense. Anyone who receives it can pass it on, and several messaging apps will generate their own preview of the card. That preview is not a bare link — WhatsApp, iMessage and the rest show both your names in the color theme you picked, generated automatically with nothing to set up, so your guests see who it’s for before they tap it. Treat it as the thing you would hand out at a door, and nothing more.
3. Personalize a link per guest
If you would rather the card said "Nimala," than nothing at all, sign in to your dashboard and tap the + button next to your guest filters. A dialog opens — type your guest names, one per line, and tap Add. Floryn writes a separate link for each one instantly.
The name is used in two places and nowhere else. The opening reads "Hi Nimala…" and the card reads "Nimala,". It is not a login, it does not let anybody see anything the plain link does not, and a guest with a personalized link sees exactly what every other guest sees.
A long name is shortened in the opening and left whole on the card, so the opening keeps to one line. Duplicate names in the list each get their own link.
The name in the link is encoded, not encrypted. It is there so the card can say hello, and it is readable by anyone who cares to look. If your guest list is the sensitive part, send the plain link instead. The privacy policy has the detail.
The names are saved with your invitation, so the list is still there when you sign in from another device. The names do not follow the link to your guests' devices: each guest's link carries only their own name. The list holds at most 200 guests: paste more than fits and the button locks until you trim the list down.
Use the filter buttons — All, Coming, Sorry, Maybe, Awaiting — to see guests by RSVP status. Select guests with the checkbox beside each name, then use the bulk bar at the bottom to copy or delete the selected links at once.
Links are usually forwarded inside a few words of your own, so above
the guest links sits a Guest message box. Type it once
and every copy carries it: a single copy pastes the message with its
link, and copying everything pastes each guest numbered with their own
pair. Put {inviteURL} where the link should land,
otherwise it goes under the words. The box comes prefilled, is saved
with the invitation, and empty means links copy alone.
4. Collect RSVPs
Guests can reply until the wedding ends: the end time you set, or the end of the wedding day if you set none. After that the buttons on the card are replaced with a note that RSVPs are closed, and any answers already given stay on your dashboard.
The RSVP setting is chosen when you create the invitation and cannot be changed afterwards, so decide before you tap Create.
What happens when a guest replies
- 1Guest tapsYes, Maybe or Sorry on the card
- 2SavedThe reply is recorded against their name
- 3You see itIt appears on your dashboard straight away
Guests tap the RSVP buttons on the card to respond: Yes, Maybe, or Sorry. Their response is saved immediately and you see it on your dashboard.
Sign in to your dashboard to see who has responded and what they said. Each guest's name shows their response status. You can remove a guest at any time, and they will see the general invitation instead of their personalized one if they open the link again.
RSVP responses are tracked per guest link. If you send the general link with no guest name, any responses are collected but not tied to a name.
5. Sign in to manage it later
How to get back in
- 1Open ManageUse the Manage link at the top of the site
- 2Enter emailThe one you used when you created it
- 3Open the linkClick the sign-in link we email you
- 4DashboardYour invitation and guest list are there
Floryn is where you come back to: to read the link again, to make guest links, or to delete the invitation. Open Manage your invitation and enter your email.
- Enter your email. The same address you used when creating the invitation.
- Open the magic link. An email arrives within a minute with a sign-in link. It works once and expires in ten minutes.
Once you are in, you can edit the details, copy the main link, build personalized guest links, and delete the invitation. Signing out clears the session, and the sign-in link at the top of the site always brings you back here.
The session lasts seven days, so you will not be signing in daily. It is tied to the browser you signed in on — signing in on your phone does not sign you in on your laptop.
6. Delete it
Your dashboard has a Delete this invitation button. It asks once, and then it is done: the link and every guest link made from it stop working immediately.
Deletion is permanent. There is no undo, no recycle bin and no backup we could restore from. If you delete by mistake you have to make a new invitation.
You do not have to sign in to delete. Every invitation is also swept automatically 90 days after it was created. If you would rather a stranger deleted it for you, write to us with the link — see the privacy policy for how.
Common questions
Can guests RSVP on the invitation?
Yes. Guests tap the RSVP buttons on the card to respond: Yes, Maybe, or Sorry. Their response appears on your dashboard immediately, and you can see all responses organized by guest.
How do I see RSVP responses?
Sign in to your dashboard and you will see each guest’s RSVP status next to their name. Responses are updated in real time as guests reply.
What do I need to make a Floryn invitation?
The two names, a date, your email address, and whatever else you want on the card. No password to choose. Fill in the form, get your invitation link, and you are done. Your email is used only to send a magic sign-in link whenever you want to get back to your dashboard.
Where is my invitation link?
It is on your dashboard straight after you create the invitation. If you close that screen, open the Manage link at the top of the site, enter your email, open the sign-in link we send, and your invitation link is on your dashboard.
Can I change the details after I have sent the link?
Yes. Sign in from /manage with your email, then choose Edit. The invitation keeps the same link, so everyone you have already sent it to still opens it and your guest list is untouched. Anyone who opens the link after the change sees the new details, guests who have already opened it included.
I can't get back into my dashboard. What now?
Go to Manage your invitation and enter the email you used when creating. A sign-in link arrives in your inbox within a minute. If that email address no longer works, write to us with the invitation link and we can help — see Still stuck? below.
How long does an invitation last?
Every invitation is permanently deleted automatically 90 days after it was created. The date of the wedding is irrelevant to this. A link older than 90 days stops working, so do not send an invitation months in advance of the day. Each invitation can have up to 200 guests.
What do guests see on the day?
The countdown reaches zero at the wedding time you entered, in the time zone you picked, and the card then shows The big day has arrived!. If you leave the time out, it reaches zero at midnight at the start of the wedding date.
Can I start from a link with the details filled in?
Yes. Open the create page with the details in the address, and the form fills in. Nothing is saved until you review it and tap Create.
https://floryn.day/create/?bride=Kumari&groom=Nimal&date=2027-03-12&time=10:30%20AM&reception=1:00%20PM&end=4:00%20PM&timezone=Asia/Colombo&venue=ABC%20Hotel&map=https%3A%2F%2Fmaps.app.goo.gl%2F...&theme=binara&rsvp=1
bride,groom: first and last names, up to 80 characters each.date:YYYY-MM-DD, today or later.time,reception,end: a time such as10:30 AM, up to 8 characters.timezone: a zone name such asAsia/ColomboorEurope/London.venue: the venue name, up to 120 characters.address: the venue address, up to 200 characters.map: the venue's Google Maps link, up to 500 characters.message: the welcome message on the card, up to 500 characters.theme:pichcha,nil-manel,binara,nelum,erabudu,kohomba,lilyorrosamal.rsvp:1turns RSVP on,0turns it off.
A value that does not fit is left out, and the rest still fill in. Names, venue, address and message that are too long are cut to their limit, so keep them within it.
What does the opening say?
Every card opens with a short intro of four lines. Floryn picks one set at random each time the card loads, and never the same one twice in a row. {guest} is the guest's first name, or "there" if the link has no name. {couple} is the bride's first name, then the groom's, like "Kumari & Nimal". Names are required, so the couple is always named.
- Said yes
Hi {guest}... / We said yes. / {couple} / We'd love you there. - Countdown
Hi {guest}... / The countdown is on. / {couple} / You're invited. - Love and party
Hi {guest}... / Come for the love, / {couple} / Stay for the party. - Two weirdos
Hi {guest}... / Two people, one love. / {couple} / They want you there. - Vows, views, vibes
Hi {guest}... / Vows and good vibes. / {couple} / Come celebrate. - Must be the place
Hi {guest}... / This is the place. / {couple} / Get ready to celebrate. - Eat, drink, married
Hi {guest}... / Eat, drink, and dance. / {couple} / Come celebrate. - Once upon
Hi {guest}... / Once, two people met. / {couple} / The rest is for you. - Fancy seeing you
Hi {guest}... / Fancy seeing you here. / {couple} / Do come celebrate. - Nice ring
Hi {guest}... / It has a ring to it. / {couple} / You have an invite.
Can I use my own photo?
Not yet. Floryn currently works with eight built-in themes. Photo upload support is coming soon.
Does the guest have to create an account or install anything?
No. A guest opens the link, the invitation opens in their browser, and that is the whole of it. No sign-up, no app, no login, nothing to download.
What shows up when I paste the link into WhatsApp or iMessage?
A preview card with both your names, in the color theme you chose. It is generated automatically the moment you create or edit the invitation, so there is nothing to set up, and it updates if you later change a name or the theme.
I edited the names or theme, but the preview still shows the old one
That delay is on the messaging app's side, not Floryn's. WhatsApp, Facebook and similar apps cache a link's preview on their own servers once they have seen it, sometimes for days, no matter how fresh the page actually is. Pasting the link into a new chat, or one that has never seen it before, usually fetches a new preview immediately. If it is still stuck after that, write to us — see Still stuck? below.
Still stuck?
Write to [email protected] with your invitation link in the subject line. That is the fastest way for us to look up the record.
The terms of use set out what Floryn does and does not promise, which is worth a read if you are about to rely on it for something important.